Introduction
What are ACLs?
ACLs versus Traditional Permissions
ACLs though powerful add additional complexity to the system and do have some limitations discussed further down this article. You will notice throughout the Bonsai Framework we add ACLs only when absolutely necessary.
Limitations
Support in Utilities - For example, the version of GNU tar packaged with the OS may not back up or restore ACLs.
Standardizing Across Operating Systems - Moving files with ACLs between operating systems that both support ACLs may not work.
Move - Moving a file created outside of an ACL directory into an ACL directory will not result in inheritance of permissions. (even with defaults set)
Backup - The most used backup command in *nix, tar, does not support ACLs unless modified. Some distributions like redhat have this built into tar. Otherwise your options are to use star or manually backup and restore the ACLs. Options are covered in this article.
Copying Files - This is no-longer an issue with modern (2012 is when I checked) versions of Ubuntu and I would guess other *nix systems. If you want to preserve specific ACL permissions and not inherit, use -p. With an older system, check that when setting default ACLs on a directory, the following commands will inherit permissions properly: local copy, sftp remote create and sftp remote copy.
SFTP - copy/create will inherit ACLs, but move from outside needs to be tested.
Creating Users and Groups
sudo --gid 3100 dailyplanet sudo --gid 3101 lexcorp sudo useradd -d /opt/web/php/ckent -m -g wgdailyplanet -u 4001 -c "Clark Kent" -s /bin/bash ckent sudo useradd -d /opt/web/php/lluthor -m -g wglexcorp -u 4005 -c "Lex Luthor" -s /bin/bash lluthor
ACLs and Groups
The most scalable way to use ACLs is to apply groups. A tutorial approach will be used to illustrate the commands.
The scenario is we want to provide website hosting for two different clients who we will start by categorizing into two different groups,
User | Group | Web Directory | File Access | Directory Access |
---|---|---|---|---|
Daily Planet Employees | wgdailyplanet | /opt/web/php/dailyplanet/ | Read, Write and Execute | Read, Write and Execute |
LexCorp Employees | wglexcorp | /opt/web/php/lexcorp/ | Read, Write and Execute | Read, Write and Execute |
Apache Server | www-data | /opt/web/php/dailyplanet/ /opt/web/php/lexcorp/ | Read | Read and Execute (required to transverse directories) |
Staff Users | staff | /opt/web/php/dailyplanet/ | Read | Read and Execute (required to transverse directories) |
Other | No Access | No Access |
We do not want employees from different companies access or even have awareness of each others web directory. At the same time, the Apache Server running as user www-data belonging to group www-data also needs access to the directories. We also want to grant users of the staff group read access for support purposes.
Creating the Directory Structure and Permissions
Directory | Permissions | ACL | ACL(default) |
---|---|---|---|
/web/ | rwXr-X--X | www-data:rX | www-data:rX |
/web/php/ | rwXr-X--X | www-data:rX | www-data:rX |
/web/php/tmp/ | rwXr-X--- | www-data:rwX | www-data:rwX |
/web/php/logs/ | rwXr-X--- | www-data:rwX | www-data:rwX |
/web/php/virtualhost/ | rwXr-X--- | www-data:rX client:rwX | www-data:rX client:rwX |
/virtualhost/www/ | rwXr-X--- | www-data:rX client:rwX | www-data:rX client:rwX |
/virtualhost/blog/ | rwXr-X--- | www-data:rX client:rwX | www-data:rX client:rwX |
/virtualhost/blog/wp-content/ | rwXr-X--- | www-data:rwX client:rwX | www-data:rwX client:rwX |
All directories must be owned by serveradmin:staff
The utility setfacl is used to add the groups to the ACL for the respective directories,
Take a look at the ACLs,
cd /opt/web/php/ # Normal permissions sudo chmod -R o-rwx ./dailyplanet/ # ACL permissions sudo setfacl -Rm g:wgdailyplanet:rwX ./dailyplanet/ sudo setfacl -Rm g:www-data:rX ./dailyplanet/ sudo setfacl -Rm g:staff:rX ./dailyplanet/
getfacl ./dailyplanet/ # file: www.dailyplanet.com # owner: ckent # group: wgdailyplanet user::rwx group::r-x group:www-data:r-x group:staff:r-x #staff is given access in case users belonging to the virtual hosts make files and try to hide them for comprimising the system group:wgdailyplanet:rwx mask::rwx other::---
Don't be alarmed that you see x on the groups www-data, staff and wgdailyplanet. That is normal *nix convention it means that execute permission will only be applied on directories. Files will be default not have execute permission applied.
Once we are happy with the permissions, change the default ACLs so any files or folders created underneath the parent directories are maintained.
Look at the default ACLs,
getfacl --default ./dailyplanet/ # file: www.dailyplanet/ # owner: ckent # group: wgdailyplanet
Apply changes to the default ACLs,
getfacl --access ./dailyplanet/ | sudo setfacl -d -RM - ./dailyplanet/
getfacl --access = retrieves the ACL the permissions applied to the directory only (default permissions are not returned). The details are then piped to setfacl and the parameters read,
-d = Change default permissions for newly created files and folder.
-M = Take as input files. Because the dash is used, the file is instead standard input.
R = Apply changes recursively to folders and files.
The default ACLs should now be changed,
getfacl --default ./dailyplanet/ # file: www.dailyplanet/ # owner: ckent # group: wgdailyplanet user::rwx group::r-x group:www-data:r-x group:staff:r-x group:wgdailyplanet:rwx mask::rwx other::---
If you want to see what the applied and default look like dont specify
getfacl ./dailyplanet/ # file: www.dailyplanet/ # owner: ckent # group: wgdailyplanet user::rwx group::r-x group:www-data:r-x group:staff:r-x group:wgdailyplanet:rwx mask::rwx other::--- default:user::rwx default:group::r-x default:group:www-data:r-x default:group:staff:r-x default:group:wgdailyplanet:rwx default:mask::rwx default:other::---
Repeat the same steps for www.lexcorp.com and change the group accordingly,
cd /opt/web/php/ # Normal permissions sudo chmod -R o-rwx ./lexcorp/ # ACL permissions sudo setfacl -Rm g:wglexcorp:rwX ./lexcorp/ sudo setfacl -Rm g:www-data:rX ./lexcorp/ sudo setfacl -Rm g:staff:rX ./lexcorp/ # Apply default ACLs getfacl --access ./lexcorp/ | sudo setfacl -d -RM - ./lexcorp/
Testing Restrictions
User Lex Luthor has been given access to his directory "lexcorp" but learns of the "dailyplanet" directory by using his robots to spy on Clark Kent's computer. So Lex terminals in...
cd /opt/web/php/ cd dailyplanet -su: cd: dailyplanet: Permission denied
After failing to enter dailyplanet he enters his own directory lexcorp and creates a directory to keep his evil plan.
cd /opt/web/php/lexcorp mkdir secrets chmod 700 secrets cd secrets ne evil plan chmod 700 secrets
Backup and Restore
Introduction
The current (September 2012) GNU version of TAR does not support ACLs without modifications.
As with any backup and restore scenario where user based permissions matter, make sure the users actually exist and match. To ensure you have no issues, also ensure consistent use of user and group UIDs.
Backup
ACLs permissions can be backed up to a text file,
sudo getfacl -R dailyplanet/ > ~/dailyplanet.acl.bck.txt
It is important to run getfacl with sudo so that getfacl can properly transverse the directories and owner comments or group comments will be retained.
Backup the files into tar and gzip or similar program,
# consider command what will also drop in the acl.bck file.
Restore
Uncompress the backup, in this case we used the tar with gunzip,
....
Restoring ACLs
Restoring is a pretty straightforward process.
cd /opt/web/php/ sudo setfacl --restore ./bck.dailyplanet.acl.bck.txt
References
Good introduction from the Ubuntu docs - https://help.ubuntu/community/FilePermissionsACLs
Slightly Skeptical view on ACLs - http://softpanorama.org/Articles/slightly_skeptical_view_on_unix_acl.shtml
Got me to understand why execute permission was set on the groups - http://superuser/questions/180545/setting-differing-acls-on-directories-and-files
Notes on backup and restoring ACLs using dump file - http://projectenvision/blog/4/Enable-Support-for-ACL-in-Debian-Ubuntu
Good article on masks - http://novell/documentation/suse91/suselinux-adminguide/html/apbs03.html