...
- Download and run a script which the community calls a bootstrap file specific to the NAS Processor processor hardware
- Modify .profile to include ipkg in the path
Steps
The following procedure was successful with DSM 4.0-2233.
Determine the processor of your NAS. Look at the Synology wiki to determine what bootstrap that matches your the NAS processor hardware.
| Note |
|---|
Not sure why by default the links point to the unstable directory. However, at least for the version used here the bootstrap in unstable and stable are identical. |
The special boostrap instructions on the wiki as of May 5, 2012 for DSM 4.0 do not seem complete nor correct. Ignore those instructions.
The following procedure was successful with DSM 4.0-2233.
Using DSM 4.0-2233 did not result in errors so ignore these instructions,
| Panel |
|---|
NEW: If you have DSM 4.0 there is an additional step. In the file /root/.profile you need to comment out (put a # before) the lines "PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/syno/sbin:/usr/syno/bin:/usr/local/sbin:/usr/local/bin" and "export PATH". To do this enter the command "vi /root/.profile" to open the file in vi. Now change vi to edit mode by pressing the "i" key on your keyboard. Use the down cursor key to move the cursor to the start of the line "PATH=/sbin..." and put a "#" infront of this line so it is now "#PATH=/sbin...". Do the same for the line below so it is now "#export PATH". Now press the escape key (to exit edit mode) and type "ZZ" (note they are capitals) to tell vi to save the file and exit. For background info on why this is neccessary for DSM 4 refer to http://forum.synology.com/enu/viewtopic.php?p=185512#p185512 |
Instead following the bootstrap installation instructions, log in through ssh as root and download the boostrap,
| Code Block | ||
|---|---|---|
| ||
cd /volume1/@tmp
wget http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable/syno-mvkw-bootstrap_1.2-7_arm.xsh |
| Warning |
|---|
Make sure to download the boostrap that matches the NAS processor hardware! |
Run the installer,
| Code Block | ||
|---|---|---|
| ||
DiskStation> chmod +x syno-mvkw-bootstrap_1.2-7_arm.xsh DiskStation> ./syno-mvkw-bootstrap_1.2-7_arm.xsh Optware Bootstrap for syno-mvkw. Extracting archive... please wait bootstrap/ bootstrap/bootstrap.sh bootstrap/ipkg-opt.ipk bootstrap/ipkg.sh bootstrap/optware-bootstrap.ipk bootstrap/wget.ipk 1232+1 records in 1232+1 records out Creating temporary ipkg repository... Installing optware-bootstrap package... Unpacking optware-bootstrap.ipk...Done. Configuring optware-bootstrap.ipk...Modifying /etc/rc.local Done. Installing ipkg... Unpacking ipkg-opt.ipk...Done. Configuring ipkg-opt.ipk...WARNING: can't open config file: /usr/syno/ssl/openssl.cnf Done. Removing temporary ipkg repository... Installing wget... Installing wget (1.12-2) to root... Configuring wget Successfully terminated. Creating /opt/etc/ipkg/cross-feed.conf... Setup complete. BusyBox v1.16.1 (2012-06-06 04:34:01 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. DiskStation> view /usr/syno/ssl/openssl.cnf /bin/sh: view: not found # Note it looks like the the openssl.cnf WARNING is normal. |
...