To finish pulling notes from NAS://tin/Crashplan/
Code Block |
---|
===== Setup
# tested on lubuntu 13.10, 16.04.2 desktop edition
#sudo apt-get install smbclient
#smbclient -L //server -U user # list shares, theres is a cifs-utils version now named (?)
#smbclient //server/share -U user # directly connect
sudo apt-get install cifs-utils
cd ~
mkdir myra
sudo mount -t cifs //192.168.0.5/myra ~/myra/ -o username=tin.pham,noexec
Settled on,
adding user phantom to folder in synology.
===== Initial Connections
# From your clent system see what mounts are available on target system (this is the system sharing the data)
# You can specify a user and verify your password works
smbclient -L //192.168.0.5 -U tin.pham
Enter tin.pham's password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.18]
Sharename Type Comment
--------- ---- -------
IPC$ IPC IPC Service ()
tin.archive Disk
tin Disk
rsync Disk
pham Disk
NetBackup Disk System default shared folder
myra Disk
guest.public Disk Available to all and guests.
home Disk home
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.18]
Server Comment
--------- -------
DISKSTATION
Workgroup Master
--------- -------
WORKGROUP W7KITCHEN
===== Troubleshoot
== Connect Directly using Samba to see if response is workig
# You may need to install smblcient first.
# Directly connect
smbclient //192.168.0.5/guest.public -U tin.pham
smb: \>
# Run ls to see results and help to see list of commads
smb: \>ls
== Try Using Local Directory
cd ~
mkdir guest.public
sudo mount -t cifs //192.168.0.5/guest.public/ ~/guest.public/ -o username=tin.pham,noexec
===== List of mount
# Backing Up
su - phantom
sudo mount -t cifs //192.168.0.5/guest.public /data/guest.public/ -o username=phantom,noexec
sudo mount -t cifs //192.168.0.5/myra /data/myra/ -o username=phantom,noexec
sudo mount -t cifs //192.168.0.5/pham /data/pham/ -o username=phantom,noexec
sudo mount -t cifs //192.168.0.5/rsync /data/rsync/ -o username=rsync,noexec # remember to use different password
sudo mount -t cifs //192.168.0.5/tin.archive /data/tin.archive -o username=phantom,noexec
# For writing
su - tin.pham
sudo mount -t cifs //192.168.0.5/guest.public /mnt/guest.public/ -o username=tin.pham,noexec # Torrents
# List samba cifs mounts
sudo mount -t cifs
# List all mounts with more details
sudo mount -v |
This CIFS Utils and Samba wikipedia article has lots good points,
- CIFS is the extension of the SMB protocol.
- In-kernel CIFS filesystem is generally the preferred method for mounting SMB/CIFS shares on Linux.
- The cifs-utils package is not part of Samba, although they were originally included with it.
apt-cache policy cifs-utils - see version installed
This is More Personal Just Dumping
Crashplan mounts using user phantom which only has read access,
Code Block | ||
---|---|---|
| ||
sudo mount -t cifs //192.168.0.5/guest.public /data/guest.public/ -o username=phantom,noexec sudo mount -t cifs //192.168.0.5/myra /data/myra/ -o username=phantom,noexec sudo mount -t cifs //192.168.0.5/pham /data/pham/ -o username=phantom,noexec sudo mount -t cifs //192.168.0.5/rsync /data/rsync -o username=phantom,noexe sudo mount -t cifs //192.168.0.5/tin.archive /data/tin.archive -o username=phantom,noexec |
CrashPlan Client
Errors
Got this error on a fresh Ubuntu Desktop 16.05.2 LTS system
Code Block | ||
---|---|---|
| ||
sudo mount -t cifs //192.168.0.5/guest.public/ ~/guest.public/ -o username=tin.pham,noexec mount: //192.168.0.5/guest.public/ is write-protected, mounting read-only mount: cannot mount //192.168.0.5/guest.public/ read-only |
Answer is that you must instal cifs-utils which mount command then hooks into. Not very clear at all.
Auto Mounting Modifying Fstab
Create credential file for id of user of target mount in /root/ using root. Change to remove read by "other".
/etc/fstab
Code Block |
---|
//192.168.0.5/guest.public /data/guest.public/ cifs uid=2000,gid=50,credentials=/root/.cifscredentials,ro 0 0 |
This is what worked for on my server with some finicking... I'll write this up later,
Code Block | ||
---|---|---|
| ||
# Mount NFS drive for Plex serveradmin 192.168.0.5:/volume1/guest.public /opt/mnt/guest.public/ nfs4 |
Working System Example
And this is now my working system looked,
Make directories in a my own data folder as my normal user,
Code Block | ||
---|---|---|
| ||
cd /data/ mkdir guest.public myra pham tin.archive rsync pham.encrypted |
Get the uid and gui of your account which in my case is uid=2000 and gid=50
Code Block | ||
---|---|---|
| ||
cat /etc/passwd | grep 2000 tin.pham:x:2000:50:Support Tin Pham:/home/tin.pham:/bin/bash |
/etc/fstab file ended up looking.. I'm using a more privileged account here, but have specified to mount using ro = read only. Thegid= and uid=,
Code Block | ||
---|---|---|
| ||
//192.168.0.5/guest.public /data/guest.public/ cifs uid=2000,gid=50,credentials=/root/.cifscredentials,ro 0 0 //192.168.0.5/myra /data/myra/ cifs uid=2000,gid=50,credentials=/root/.cifscredentials,ro 0 0 //192.168.0.5/pham /data/pham/ cifs uid=2000,gid=50,credentials=/root/.cifscredentials,ro 0 0 //192.168.0.5/tin.archive /data/tin.archive/ cifs uid=2000,gid=50,credentials=/root/.cifscredentials,ro 0 0 //192.168.0.5/rsync /data/rsync/ cifs uid=2000,gid=50,credentials=/root/.cifscredentials,ro 0 0 //192.168.0.5/pham.encrypted /data/pham.encrypted/ cifs uid=2000,gid=50,credentials=/root/.cifscredentials,ro 0 0 |
Reboot and if all things work those directories will now be mounted with the NAS data.
References
Automount network drive on startup - https://ubuntuforums.org/showthread.php?t=1806455